|
|
|
National Stock Number:
5310-00-099-7784
Federal Supply Class:
5310
National Item Identification Number:
000997784
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GN10FM28 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | DRILLED HOLE DIAMETER | 0.045 INCHES NOMINAL | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | NOMINAL THREAD SIZE | 1.750 INCHES | | NUT DIAMETER | 2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SPECIFICATION/STANDARD DATA | 26512-GN10FM MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNJ | | THREAD QUANTITY PER INCH | 16 |
|
|