|
|
|
National Stock Number:
5310-00-113-3660
Federal Supply Class:
5310
National Item Identification Number:
001133660
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 64A98C9-2 | 0ZLV2 | GSE PRODUCTION AND SUPPORT LLC | | 64A98C9-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 64A98C9-2 | 11201 | DEVAL LIFE CYCLE SUPPORT LLC | | 64A98C9-2 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 64A98C9-2 | 98296 | STANDARD MFG CO INC |
|
Techincal Specification:
| FEATURES PROVIDED | CASEHARDENED | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 1.575 INCHES MINIMUM AND 1.580 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.000 INCHES MINIMUM AND 2.124 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.2421 INCHES MINIMUM AND 0.2431 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8620 OVERALL | | MINIMUM YIELD STRENGTH | 125000 POUNDS PER SQUARE INCH | | RECESS DIAMETER | 1.637 INCHES NOMINAL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | STYLE DESIGNATOR | RECESSED | | SURFACE FINISH | 32.0 MICROINCHES BOTTOM | | SURFACE FINISH | 32.0 MICROINCHES TOP |
|
|