|
|
|
National Stock Number:
5310-00-130-6941
Federal Supply Class:
5310
National Item Identification Number:
001306941
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 177974 PIECE 6 | 56232 | LOCKHEED MARTIN CORPORATION | | 177974PC6 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| COUNTERSINK ANGLE | 30.0 DEGREES NOMINAL BOSS | | CROSS-SECTIONAL SHAPE | ROUND OVERALL | | FLANGE DIAMETER | 0.360 INCHES NOMINAL | | FLANGE THICKNESS | 0.055 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD SIZE | 0.164 INCHES | | NUT DIAMETER | 0.281 INCHES MINIMUM AND 0.282 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES | UNC |
|
|