|
|
|
National Stock Number:
5310-00-132-1826
Federal Supply Class:
5310
National Item Identification Number:
001321826
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4G13756-101A | 6Z800 | A AND M AEROSPACE, INC. | | 4G13756-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 2.910 INCHES MINIMUM AND 2.970 INCHES MAXIMUM | | OVERALL DIAMETER | 4.090 INCHES MINIMUM AND 4.150 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7952 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-698,COND CRCQ,FINISH 1 FED SPEC 1ST MATERIAL RESPONSE AND MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1020 OR STEEL COMP 1025 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
|
|