5310-01-369-8927, WASHER,FLAT

National Stock Number:
5310-01-369-8927

Federal Supply Class:
5310

National Item Identification Number:
013698927

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

BACW10CW100

81205

THE BOEING COMPANY

Techincal Specification:

MATERIAL	STEEL COMP 303 OR
	STEEL COMP 304 OR
	STEEL COMP 321 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	10.5 MILLIMETERS MINIMUM AND
	10.9 MILLIMETERS MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	17.6 MILLIMETERS MINIMUM AND
	18.0 MILLIMETERS MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	1.3 MILLIMETERS MINIMUM AND
	1.7 MILLIMETERS MAXIMUM
SPECIFICATION/STANDARD DATA	81205-BACW10CW PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT

Click here to Register for Free 30-day Trial