5310-01-375-7677, WASHER,FLAT

National Stock Number:
5310-01-375-7677

Federal Supply Class:
5310

National Item Identification Number:
013757677

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

12387300-6	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.139 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 1020 AND STEEL COMP 1025 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 2 GRADE AND A CLASS
OVERALL DIAMETER	0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTMB 633 TY 2, ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THICKNESS	0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM

Click here to Register for Free 30-day Trial