|
|
|
National Stock Number:
5310-01-566-2970
Federal Supply Class:
5310
National Item Identification Number:
015662970
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 99002B2166 | 01365 | MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 5052 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/B FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PAINT BODY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE BODY | | CENTER HOLE SHAPE STYLE | ROUND | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 50.0 MILLIMETERS NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.093 INCHES NOMINAL | | SPECIAL FEATURES | DRILL AND TAP FOR 250-20 UNC | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, BRIDLE RING |
|
|