|
|
|
National Stock Number:
5315-00-041-0916
Federal Supply Class:
5315
National Item Identification Number:
000410916
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.203 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.140 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.013 INCHES MINIMUM AND 0.027 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | COPPER OVERALL | | PIN OVERALL LENGTH | 1.297 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.4995 INCHES MINIMUM AND 0.50000 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | 0.125 IN. DIA HOLE DRILLED IN CENTER,2 DRILLEDHOLES ON END WITH 60.150 TO 60.217 DEG ANGLE BETWEEN CENTER LINE OF HOLES |
|
|