|
|
|
National Stock Number:
5315-00-044-4194
Federal Supply Class:
5315
National Item Identification Number:
000444194
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 22618 | 0UES3 | MID-AMERICA AEROTECH, LLC | | 22618 | 19156 | MOOG INC | | 22618 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 22618 | 94697 | MOOG INC | | 24099 | 19156 | MOOG INC |
|
Techincal Specification:
| FIRST HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.010 INCHES NOMINAL | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416 OVERALL | | PIN OVERALL LENGTH | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|