|
|
|
National Stock Number:
5315-00-046-6292
Federal Supply Class:
5315
National Item Identification Number:
000466292
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10516092 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| FIRST END TAPER LENGTH | 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 TY303 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 TY303SE ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1030 OR STEEL COMP 303SE OVERALL | | PIN OVERALL LENGTH | 1.844 INCHES MINIMUM AND 1.875 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.6255 INCHES MINIMUM AND 0.6257 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.156 INCHES NOMINAL |
|
|