|
|
|
National Stock Number:
5315-00-054-1447
Federal Supply Class:
5315
National Item Identification Number:
000541447
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| MS51932-6 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.126 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1117 OR STEEL COMP 1118 OVERALL | | PIN OVERALL LENGTH | 1.375 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
|
|