|
|
|
National Stock Number:
5315-00-066-6062
Federal Supply Class:
5315
National Item Identification Number:
000666062
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 5315000666062 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315000666062 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7792069 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| CHAMFER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM | | DIAMETER | 0.153 INCHES MINIMUM AND 0.155 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.147 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | HEAD STYLE | FLAT FILLISTER | | HEIGHT | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-570 CLASS 01 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP O1 OVERALL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | UNDER HEAD LENGTH | 0.823 INCHES MINIMUM AND 0.864 INCHES MAXIMUM |
|
|