|
|
|
National Stock Number:
5315-00-074-8853
Federal Supply Class:
5315
National Item Identification Number:
000748853
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 4E20945 | 99832 | SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 4.500 INCHES NOMINAL | | FIRST END LOCATION | SHANK END | | FIRST HOLE DIAMETER | 0.250 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | OVERALL LENGTH | 10.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | SPECIAL FEATURES | 3/8-24 IN. NF TAP HOLE 1-3/8 IN. DEEP ON STEPPED END 1/4 IN. DIA HOLE DRILLED THRU SLOT END TO MEET DRILLED HOLE THRU HORIZONTAL PLANE,KEYWAY SLOT 3/8 IN. W BY 2-1/2 IN. LONG BY 1/4 IN. DEEP LOCATED ON FIRST STEP AT A 56 DEG ANGLE W/SLOT END ON A HORIVONTAL PLANE | | SECOND END CORNER RADIUS | 0.062 INCHES NOMINAL | | SECOND END STYLE | RADIUS | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
|
|