|
|
|
National Stock Number:
5315-00-080-1942
Federal Supply Class:
5315
National Item Identification Number:
000801942
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS20392-1C33 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-1C33 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-1C33 | K0668 | LEONARDO UK LTD |
|
Techincal Specification:
| 0.124 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 4037 OR | | STEEL COMP 4130 OR | | STEEL COMP 8630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.5 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | SHEAR STRENGTH | 1840 DOUBLE POUND | | UNDER HEAD LENGTH | 1.147 INCHES MINIMUM AND | | 1.167 INCHES MAXIMUM | | DIAMETER | 0.122 INCHES MINIMUM AND | | CHAMFER LENGTH | 0.062 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 14.5 DEGREES MINIMUM AND | | 15.5 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | HEIGHT | 0.030 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.091 INCHES NOMINAL | | SPECIAL FEATURES | THE SHANK END MAX HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR |
|
|