|
|
|
National Stock Number:
5315-00-087-3640
Federal Supply Class:
5315
National Item Identification Number:
000873640
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 13161-16-2 | 03533 | CRANE CARRIER COMPANY, LLC | | 13161-16-2 | 81336 | CHIEF OF ENGINEERS DEPT OF ARMY | | D13161-16-2 | 81336 | CHIEF OF ENGINEERS DEPT OF ARMY |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.375 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.312 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.196 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES MINIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PIN OVERALL LENGTH | 2.312 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.5000 INCHES NOMINAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.125 INCHES MINIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.156 INCHES NOMINAL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|