|
|
|
National Stock Number:
5315-00-102-4448
Federal Supply Class:
5315
National Item Identification Number:
001024448
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 55A44B31-3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 55A44B31-3 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 67A79B31 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 55A44B31-3 | 97342 | C T M CO INC |
|
Techincal Specification:
| CHAMFER LENGTH | 0.040 INCHES NOMINAL | | DIAMETER | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.190 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | HEAD STYLE | ROUND W/WRENCH FLATS CHAMFERED | | HEIGHT | 0.380 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | PIN HEAD DIAMETER | 1.000 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | HOLE IN SHANK COUNTERSUNK AND TAPPED 8-32 UNC-3B 1.080 IN. FROM END,RD SURFACE OF HEAD KNURLED,SLOTTED INTERNAL DRIVE STYLE | | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | UNDER HEAD LENGTH | 1.780 INCHES NOMINAL |
|
|