|
|
|
National Stock Number:
5315-00-104-9359
Federal Supply Class:
5315
National Item Identification Number:
001049359
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 64A97C30-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 64A97C30-1 | 11201 | DEVAL LIFE CYCLE SUPPORT LLC | | 64A97C30-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| EFFECTIVE LENGTH | 5.594 INCHES NOMINAL | | DIAMETER | 0.998 INCHES MINIMUM AND 0.999 INCHES MAXIMUM | | FIRST END LOCATION | BOTH ENDS | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | OVERALL LENGTH | 6.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4145 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND UNDERCUT WIDTH | 0.094 INCHES NOMINAL | | SPECIAL FEATURES | HOLES DRILLED THROUGH ONE WALL 0.187 IN. DIA,0.875 IN. DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN,HOLE DRILLED THROUGH LONGITUDINAL CENTER 0.187 IN. DIA,5.375 IN. LG | | STYLE DESIGNATOR | GROOVE | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | UNDERCUT DIAMETER | 0.937 INCHES MINIMUM AND 0.943 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.094 INCHES NOMINAL |
|
|