|
|
|
National Stock Number:
5315-00-107-5558
Federal Supply Class:
5315
National Item Identification Number:
001075558
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 215-29302-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.550 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL | | FIRST END LOCATION | SHANK END | | FIRST HOLE DIAMETER | 0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 2.228 INCHES MINIMUM AND 2.234 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.106 INCHES NOMINAL | | SHANK DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | SHANK LENGTH | 1.310 INCHES NOMINAL | | SHOULDER DIAMETER | 0.375 INCHES NOMINAL | | SPECIAL FEATURES | FURNISHED W/ONE PIN,SPRING AND ONE COTTER PIN | | STYLE DESIGNATOR | SHOULDER |
|
|