| CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.350 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.138 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 7.620 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4130 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, SHROUD, SPACER |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.182 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.343 INCHES NOMINAL |
| SHANK DIAMETER | 0.182 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| SHANK LENGTH | 0.343 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.308 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL2,TY2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |