|
|
|
National Stock Number:
5315-00-111-5322
Federal Supply Class:
5315
National Item Identification Number:
001115322
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 13207E6087-1 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.547 INCHES MINIMUM AND 2.577 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.154 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 4340 OVERALL | | PIN OVERALL DIAMETER | 0.7400 INCHES MINIMUM AND 0.7450 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.840 INCHES MINIMUM AND 2.900 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2B FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL |
|
|