| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| DIAMETER | 0.1567 INCHES MINIMUM AND 0.1572 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.080 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL |
| HEIGHT | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| HEAD STYLE | FLAT |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 630 OVERALL |
| PIN HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 125.0 MICROINCHES HEAD BEARING SURFACE |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EMS 250,TYPE 2,CLASS A,72599 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| UNDER HEAD LENGTH | 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |