| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.080 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.424 INCHES NOMINAL |
| FIRST END LOCATION | CHAMFERED END |
| FIRST HOLE DIAMETER | 0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 1.882 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468,GROUP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OVERALL |
| SECOND END COUNTERBORE DIAMETER | 0.106 INCHES NOMINAL |
| SECOND END STYLE | COUNTERBORED W/O THRU HOLE |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM |
| SHANK DIAMETER | 0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM |
| SHANK LENGTH | 0.077 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.312 INCHES NOMINAL |
| SPECIAL FEATURES | ITEM HAS A TOTAL OF 9 HOLES EQUALLY SPACED |
| STYLE DESIGNATOR | UNDERCUT |
| UNDERCUT DIAMETER | 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.069 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |