|
|
|
National Stock Number:
5315-00-119-7521
Federal Supply Class:
5315
National Item Identification Number:
001197521
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 556AS144-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.187 INCHES NOMINAL | | FIRST END LOCATION | LONG END | | FIRST HOLE DIAMETER | 0.190 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 2.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416 OVERALL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.875 INCHES NOMINAL | | SHANK DIAMETER | 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | SHANK LENGTH | 0.375 INCHES NOMINAL | | SHOULDER DIAMETER | 0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | SPECIAL FEATURES | HOLE TAPPED 10-24 UNC 3B THREAD AND SHORT SHANK CHAMFER TO HAVE 0.031 IN. RADIUS | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|