| EFFECTIVE LENGTH | 1.500 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| DIAMETER | 0.870 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| HARDNESS RATING | 33.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4340 OVERALL |
| PIN HEAD DIAMETER | 1.070 INCHES NOMINAL |
| SHEAR STRENGTH | 160000 SINGLE POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | GROOVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDERCUT DIAMETER | 0.817 INCHES MINIMUM AND 0.825 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 1.620 INCHES MINIMUM AND 1.640 INCHES MAXIMUM |