|
|
|
National Stock Number:
5315-00-123-2491
Federal Supply Class:
5315
National Item Identification Number:
001232491
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| F61W1816 | 3H889 | PARKER-HANNIFIN CORPORATION | | F61W1816 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.820 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.090 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.067 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 316 OR STEEL COMP 303S OR STEEL COMP 303SE OVERALL | | PIN OVERALL LENGTH | 2.000 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1840 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.067 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|