|
|
|
National Stock Number:
5315-00-127-3635
Federal Supply Class:
5315
National Item Identification Number:
001273635
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| AN121817 | 0U583 | SAE INTERNATIONAL | | AN121817 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.637 INCHES MINIMUM AND | | 1.677 INCHES MAXIMUM | | DIAMETER | 0.371 INCHES MINIMUM AND | | 0.373 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.068 INCHES MINIMUM AND | | 0.088 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 10.0 DEGREES MINIMUM AND | | 20.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | HEIGHT | 0.052 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND | | 0.101 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.110 INCHES MINIMUM AND | | 0.170 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES SHANK END |
|
|