|
|
|
National Stock Number:
5315-00-131-7887
Federal Supply Class:
5315
National Item Identification Number:
001317887
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 268-22181-1 | 11530 | LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN INFORMATION SYSTEMS & GLOBAL SOLUTIONS | | 268-22181-1 | 3VUJ2 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.792 INCHES MINIMUM AND | | 0.832 INCHES MAXIMUM | | DIAMETER | 0.124 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.015 INCHES MINIMUM AND | | 0.046 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.246 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | HEIGHT | 0.146 INCHES MINIMUM AND | | 0.166 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.062 INCHES MINIMUM AND | | 0.065 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.093 INCHES MINIMUM AND | | 0.109 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11530 | | DESIGN CONTROL REFERENCE | 268-22181-1 |
|
|