|
|
|
National Stock Number:
5315-00-132-1485
Federal Supply Class:
5315
National Item Identification Number:
001321485
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 206-040-332-1 | 31362 | RHEACO INC. | | 206-040-332-1 | 54878 | ROTAIR AEROSPACE CORP | | 206-040-332-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.218 INCHES MINIMUM AND | | 1.238 INCHES MAXIMUM | | DIAMETER | 0.186 INCHES MINIMUM AND | | 0.188 INCHES MAXIMUM | | HEAD STYLE | KNURLED NO. 1 | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | ALUMINUM ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 ALLOY 1100 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | CHAMFER LENGTH | 0.015 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | HEIGHT | 0.125 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.061 INCHES MINIMUM AND | | 0.067 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 206-040-332-1 |
|
|