| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.062 INCHES MINIMUM AND 5.067 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.625 INCHES NOMINAL |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST HOLE DIAMETER | 0.231 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| HARDNESS RATING | 88.3 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 91.4 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 1015 OR STEEL COMP 1025 OVERALL |
| SPECIAL FEATURES | 45 DEG ANGLE BETWEEN C/L OF HOLES |
| PIN OVERALL DIAMETER | 0.4978 INCHES MINIMUM AND 0.4988 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 6.310 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.231 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |