|
|
|
National Stock Number:
5315-00-138-6136
Federal Supply Class:
5315
National Item Identification Number:
001386136
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 700018 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 707813 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | HEAD STYLE | FLAT FILLISTER | | MATERIAL | STEEL COMP E52100 OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OR | | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 44.0 ROCKWELL C MINIMUM AND | | 62.0 ROCKWELL C MAXIMUM OVERALL | | DIAMETER | 0.1903 INCHES MINIMUM AND | | 0.1905 INCHES MAXIMUM | | EFFECTIVE LENGTH | 0.567 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.160 INCHES MINIMUM AND | | 0.180 INCHES MAXIMUM | | UNDER HEAD LENGTH | 0.699 INCHES MINIMUM AND | | 0.719 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.025 INCHES MAXIMUM | | GRIP LENGTH | 0.603 INCHES MINIMUM AND | | 0.613 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.271 INCHES MINIMUM AND | | 0.291 INCHES MAXIMUM | | HEIGHT | 0.104 INCHES MINIMUM AND | | 0.114 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.073 INCHES MINIMUM AND | | 0.083 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.101 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES LONG SHANK | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99167 | | DESIGN CONTROL REFERENCE | 707813 |
|
|