|
|
|
National Stock Number:
5315-00-561-9097
Federal Supply Class:
5315
National Item Identification Number:
005619097
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2601097 | 18355 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.141 INCHES MINIMUM AND | | 0.172 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.626 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 1.906 INCHES MINIMUM AND | | 1.969 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.7500 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18355 | | DESIGN CONTROL REFERENCE | 2601097 |
|
|