|
|
|
National Stock Number:
5315-00-575-4810
Federal Supply Class:
5315
National Item Identification Number:
005754810
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 911540-1 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8630 OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND | | 50.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.124 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | PIN OVERALL LENGTH | 1.940 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.2486 INCHES MINIMUM AND | | 0.2496 INCHES MAXIMUM | | SPECIAL FEATURES | SECOND HOLE DRILLED AND TAPPED 8/32 NC-3B THD 0.780 IN. FROM DRILLED END TAPPED HOLE COUNTERSUNK 100 DEG EACH END |
|
|