|
|
|
National Stock Number:
5315-01-394-2413
Federal Supply Class:
5315
National Item Identification Number:
013942413
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12420370 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 12420370-005 | 076M6 | AMZ ALABAMA INC. | | 12420370-005 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP | | 12420370-005 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1144 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A311, TY B ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633, TY 2, FE/ZN8 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 2.0 MILLIMETERS MINIMUM AND | | 4.0 MILLIMETERS MAXIMUM | | FIRST END TAPER ANGLE | 2.0 DEGREES MINIMUM AND | | 4.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 8.2 MILLIMETERS MINIMUM AND | | 9.2 MILLIMETERS MAXIMUM | | SECOND HOLE DIAMETER | 7.4 MILLIMETERS MINIMUM AND | | 8.6 MILLIMETERS MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 12.7 MILLIMETERS NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 62.0 MILLIMETERS NOMINAL | | PIN OVERALL LENGTH | 73.1 MILLIMETERS MINIMUM AND | | 123.9 MILLIMETERS MAXIMUM | | PIN OVERALL DIAMETER | 25.40 MILLIMETERS NOMINAL | | SPECIAL FEATURES | THIRD HOLE 7.5MM MIN AND 8.5MM MAX ON SLOTED END; SLOT LENGTH 14.0MM AND 6.0MM HIGH ON CENTER OF PIN END. |
|
|