| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | DRIVE STEM-TYPE H |
| FASTENER LENGTH | 0.302 INCHES MINIMUM AND 0.342 INCHES MAXIMUM |
| GRIP LENGTH | 0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC ALL MATERIAL RESPONSES SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | ALUMINUM ALLOY 2117 OR ALUMINUM ALLOY 5056 SLEEVE |
| MATERIAL | ALUMINUM ALLOY 2117 BODY |
| MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 STEM |
| SHANK DIAMETER | 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| SHANK STYLE | DRIVE PIN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT | ANODIZE BODY |
| SURFACE TREATMENT | PASSIVATE STEM |