5310-00-072-5346 WASHER,FLAT Index 5342-00-072-5348 LATCH,LAUNCHER,GUIDED MISSILE

National Stock Number:
5320-00-072-5347

Federal Supply Class:
5320

National Item Identification Number:
000725347

Description:
RIVET,BLIND

Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.


Manufacturer Information:
PLT110-8-692215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICETHREADED STEM
GRIP LENGTH0.345 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM BOLT
HEAD MAJOR DIAMETER0.463 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT
MATERIALSTEEL COMP 304 OR STEEL COMP 303F OR STEEL COMP 303 SLEEVE
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
SHANK DIAMETER0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SHANK STYLETHREADED SELF-PLUGGING SHANK W/SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
SURFACE TREATMENTCADMIUM AND CHROMATE AND PASSIVATE SLEEVE
SURFACE TREATMENTCADMIUM AND CHROMATE BOLT
SURFACE TREATMENTCADMIUM AND CHROMATE NUT


Click here to Register for Free 30-day Trial