|
|
|
National Stock Number:
5320-01-092-5046
Federal Supply Class:
5320
National Item Identification Number:
010925046
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| TL966-5-13-44 | 17446 | HUCK INTERNATIONAL, INC | | TL966-5-13-44 | 27624 | SPS TECHNOLOGIES LLC | | TL966-5-13-44 | 56878 | SPS TECHNOLOGIES, LLC | | TL966-5-13-44 | 59563 | REID PRODUCTS INC. | | TL966-5-13-44 | 92218 | WAKEFIELD CORP THE | | TL966-5-13-44 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 OR | | STEEL COMP E4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | SHEAR STRENGTH | 108000 SINGLE POUNDS PER SQUARE INCH | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.537 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | SHANK STYLE | PIN-RIVET, TAPERED, THREADED | | FASTENER LENGTH | 1.208 INCHES MINIMUM AND | | 1.233 INCHES MAXIMUM | | SHANK DIAMETER | 0.369 INCHES NOMINAL | | TIP DIAMETER | 0.3554 INCHES NOMINAL | | GRIP LENGTH | 0.802 INCHES MINIMUM AND | | 0.817 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 24 | | THREAD DIRECTION | RIGHT-HAND | | LUBRICATION | CETYL ALCOHOL | | SPECIAL FEATURES | 8-32UNJC-3B THREAD SIZE,0.560 IN. LENGTH OF THREADS ALONG THE LONGITUDINAL AXIS FROM THE HEAD END,0.120 IN. SLOT LENGTH,0.060 IN. SLOT WIDTH LOCATED 0.500 IN. FROM TOP OF HEAD TO CENTER OF SLOT | | CRITICALITY CODE JUSTIFICATION | FEAT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 17446 | | DESIGN CONTROL REFERENCE | TL966-5-13-44 |
|
|