|
|
|
National Stock Number:
5330-00-036-3622
Federal Supply Class:
5330
National Item Identification Number:
000363622
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 01223 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | 88920 | 01843 | AMBAC INTERNATIONAL CORPORATION |
|
Techincal Specification:
| APERTURE LENGTH | 7.625 INCHES NOMINAL | | APERTURE WIDTH | 5.812 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.500 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.141 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.062 INCHES NOMINAL | | HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL | | HOLE DIAMETER | 0.250 INCHES NOMINAL | | INSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.307 INCHES NOMINAL | | INSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.307 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.469 INCHES NOMINAL | | OVERALL LENGTH | 8.062 INCHES NOMINAL | | OVERALL WIDTH | 6.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-1149,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | SPECIAL FEATURES | TWO 0.125 IN. DIA HOLES ON LG,ONE 1.781 IN. IN FROM LEFT END ON UPPER SIDE ONE 2.031 IN. FROM RIGHT END ON LOWER SIDE,BOTH HOLES ON LOWER SIDE,BOTH HOLES 0.141 IN. IN FROM APERTURE SIDE |
|
|