| CENTER SECTION HEIGHT | 2.503 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.003 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.855 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.627 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE4130 ASSN STD 1ST MATERIAL RESPONSE OR ASAE8630 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 1.131 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG END RADIUS | 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| SPECIAL FEATURES | HARDNESS ROCKWELL C32 TO C38 |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |