|
|
|
National Stock Number:
5340-00-036-0380
Federal Supply Class:
5340
National Item Identification Number:
000360380
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 10231861 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV | | 10231861 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.250 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 14.843 INCHES MINIMUM AND 14.873 INCHES MAXIMUM | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 1.000 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 14.843 INCHES MINIMUM AND 14.873 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,T6511 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 1.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | FIRST AND SECOND LEGS HAVE ADDITONAL HOLES,0.046 IN. MIN AND 0.051 IN. MAX DIA EACH LEG AND 0.125 IN. MIN AND 0.155 IN. MAX DIA EACH LEG; CENTER LEG HAS 2 HOLES 0.220 IN. MIN AND 0.226 IN.MAX DIA; ITEM HAS A PAD GLUED ON CENTER SECTION | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH 21.19 MIL STD ALL TREATMENT RESPONSES | | SURFACE TREATMENT | PRIMER AND ENAMEL SYNTHETIC LUSTERLESS |
|
|