|
|
|
National Stock Number:
5340-00-048-5650
Federal Supply Class:
5340
National Item Identification Number:
000485650
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 6723713 | 24617 | GENERAL MOTORS CORP | | 6723713 | 63005 | ROLLS-ROYCE CORPORATION | | 6723713 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.375 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.217 INCHES MINIMUM AND 0.224 INCHES MAXIMUM | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG WIDTH | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG WIDTH | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|