| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.340 INCHES MINIMUM AND 1.400 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 0.260 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.032 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD O FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.340 INCHES MINIMUM AND 1.400 INCHES MAXIMUM |
| SECOND LEG END WIDTH | 0.260 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.098 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.032 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-1757 FED SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 3RD TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE ZINC OR ANODIZE OR CHROMATE |