| CENTER SECTION HEIGHT | 0.472 INCHES MINIMUM AND 0.488 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| FABRICATION METHOD | FORMED |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.435 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.508 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.185 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| FIRST LEG END WIDTH | 2.128 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.280 INCHES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| HEAT TREATMENT | ANNEALED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5548 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.250 INCHES NOMINAL |
| SECOND LEG END WIDTH | 3.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.220 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT | PASSIVATE |