|
|
|
National Stock Number:
5340-00-081-2501
Federal Supply Class:
5340
National Item Identification Number:
000812501
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 12M674-7 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.860 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.850 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.100 INCHES NOMINAL | | FIRST LEG WIDTH | 0.380 INCHES NOMINAL | | FIRST LEG LENGTH | 0.715 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.750 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|