| CENTER SECTION HEIGHT | 2.490 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 3.434 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.964 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.205 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.645 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.205 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.205 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| FIRST LEG WIDTH | 4.254 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 0.645 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.205 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.645 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG HAS CUTOUT OF 1.000 IN.RADIUS LEAVING 0.500 IN. W ON EACH SIDE |
| STYLE DESIGNATOR | DOUBLE ANGLE |