|
|
|
National Stock Number:
5340-00-103-5731
Federal Supply Class:
5340
National Item Identification Number:
001035731
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 10949735-2 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5340001035731 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5340001035731 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS | | FIRST LEG HOLE DIAMETER | 0.312 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.625 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.406 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.075 INCHES NOMINAL | | FIRST LEG WIDTH | 2.375 INCHES NOMINAL | | FIRST LEG LENGTH | 0.875 INCHES NOMINAL | | FIRST LEG SLOT LENGTH | 0.375 INCHES NOMINAL | | FIRST LEG SLOT WIDTH | 0.312 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1008 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.344 INCHES NOMINAL | | SECOND LEG LENGTH | 1.188 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.938 INCHES NOMINAL | | SECOND LEG END WIDTH | 0.688 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.252 INCHES NOMINAL | | SECOND LEG STYLE | ANGLE | | SECOND LEG THICKNESS | 0.075 INCHES NOMINAL | | SECOND LEG WIDTH | 2.375 INCHES NOMINAL | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|