|
|
|
National Stock Number:
5340-00-103-5785
Federal Supply Class:
5340
National Item Identification Number:
001035785
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 10911389 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.120 INCHES MINIMUM AND 1.150 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.119 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.620 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.370 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.119 INCHES NOMINAL | | FIRST LEG WIDTH | 0.620 INCHES NOMINAL | | MATERIAL | STEEL COMP 1065 | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | SECOND LEG LENGTH | 1.850 INCHES MINIMUM AND 1.880 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.119 INCHES NOMINAL | | SECOND LEG WIDTH | 0.620 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|