| CENTER SECTION THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 1.080 INCHES NOMINAL |
| FABRICATION METHOD | FORMED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG ANGLE | 120.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.633 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.640 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.520 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.080 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.430 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG END WIDTH | 0.560 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.960 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |