| CENTER SECTION HEIGHT | 0.933 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| FABRICATION METHOD | MACHINED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.652 INCHES MINIMUM AND 0.712 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 410 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG END RADIUS | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.686 INCHES MINIMUM AND 0.738 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |