| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| FIRST LEG ANGLE | 120.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.670 INCHES MINIMUM AND 3.730 INCHES MAXIMUM |
| HEAT TREATMENT | T-3 SOLUTION HEAT TREATED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.170 INCHES MINIMUM AND 1.230 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.208 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.700 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 4001,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |