| CENTER SECTION HEIGHT | 0.900 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| FABRICATION METHOD | STAMPED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.350 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| REINFORCEMENT METHOD | TURNED EDGE |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 2.352 INCHES MINIMUM AND 2.400 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG END RADIUS | 0.350 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SPECIAL FEATURES | MOUNTING PAD ON SHORT LEG |
| STYLE DESIGNATOR | DOUBLE ANGLE |